{"id":3648,"date":"2026-11-18T18:01:48","date_gmt":"2026-11-18T10:01:48","guid":{"rendered":"http:\/\/www.artemida-group.com\/blog\/?p=3648"},"modified":"2026-11-18T18:01:48","modified_gmt":"2026-11-18T10:01:48","slug":"what-o-rings-are-used-in-aerospace-applications-4307-c96cfd","status":"publish","type":"post","link":"http:\/\/www.artemida-group.com\/blog\/2026\/11\/18\/what-o-rings-are-used-in-aerospace-applications-4307-c96cfd\/","title":{"rendered":"What O-Rings are used in aerospace applications?"},"content":{"rendered":"<p>When I first started out in the o-ring supply business, I had no idea how critical these small, circular pieces of rubber would be to the aerospace industry. Most people see an o-ring as a simple seal\u2014something that keeps water out of a garden hose or oil in a car engine. But in aerospace, an o-ring isn\u2019t just a component; it\u2019s a fail-safe that can mean the difference between a successful mission and a catastrophic disaster. Over the past 12 years, I\u2019ve supplied o-rings to dozens of aerospace contractors, and every interaction has taught me how tailored these parts need to be for the extreme conditions of flight, space, and atmospheric re-entry. <a href=\"https:\/\/www.bsbelts.com\/o-ring\/\">O-Ring<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.bsbelts.com\/uploads\/48226\/small\/classical-wrapped-v-belt20260728100800eae02.jpg\"><\/p>\n<p>Let\u2019s start with the basics: aerospace o-rings are designed to seal against two types of threats\u2014pressure differentials and environmental extremes. On a commercial airliner, for example, the cabin is pressurized to around 8,000 feet even when the plane is flying at 36,000 feet. That creates a pressure gap between the inside of the fuselage and the outside, and o-rings line every access panel, hydraulic line, and fuel tank connection to prevent decompression. For a satellite in low Earth orbit, the threats are even starker: extreme temperature swings (from -150\u00b0C in the shadow of Earth to 120\u00b0C in direct sunlight), vacuum conditions that can cause rubber to outgas, and tiny micrometeoroids that could puncture a seal. That\u2019s why not all o-rings work for aerospace applications\u2014we have to pick the right material, size, and durability for each specific use case.<\/p>\n<p>One of the most common aerospace uses I see is in hydraulic systems. Commercial jets rely on hydraulic pressure to move their landing gear, flaps, and ailerons. These systems operate at pressures up to 3,000 psi, and the o-rings that seal hydraulic cylinders have to hold up not just to that pressure, but to the fluid itself\u2014usually a phosphate ester-based hydraulic fluid that can break down standard rubber. For this, I primarily supply o-rings made from Buna-N nitrile rubber or EPDM, but wait\u2014Buna-N isn\u2019t right for every hydraulic system. Older regional jets often use Buna-N because it\u2019s resistant to standard hydraulic fluid and can handle temperatures from -40\u00b0C to 120\u00b0C, while newer wide-body planes that fly at higher altitudes (where temperatures can drop even lower) use a fluorocarbon (Viton) o-ring, which has a wider temperature range (-20\u00b0C to 200\u00b0C) and is more resistant to both heat and chemical breakdown. Last year, I fulfilled a bulk order for a major aerospace component manufacturer that builds hydraulic actuators for Boeing\u2019s 787 Dreamliner; they specifically asked for Viton o-rings because the Dreamliner\u2019s hydraulic systems run hotter than older models, and the seals need to last the lifespan of the plane, not just a few years.<\/p>\n<p>Another area where aerospace o-rings are non-negotiable is in fuel systems. Jet fuel is a harsh substance, and fuel tanks on aircraft are designed to hold fuel while also resisting ignition\u2014even in a lightning strike. O-rings in fuel tank connections have to be resistant to jet fuel (both kerosene-based and alternative sustainable aviation fuel blends) and also meet strict fire-safety standards, meaning they can\u2019t release toxic fumes or burn easily. For these applications, many of my clients turn to silicone o-rings? No, wait\u2014silicone isn\u2019t resistant to jet fuel. Silicone works for things like cabin air systems, but fuel systems require either EPDM or fluorosilicone. Fluorosilicone is a middle ground: it\u2019s got the heat resistance of silicone (up to 200\u00b0C) but is resistant to hydrocarbon fuels, which standard silicone isn\u2019t. I once had a client come to me with a problem after a test flight where their fuel line o-rings were swelling up; they\u2019d used regular silicone, and it reacted with the alternative aviation fuel they were testing. We swapped them for fluorosilicone o-rings, and the issue was gone immediately. That\u2019s the kind of problem that makes aerospace o-ring work so important\u2014one wrong material, and a whole test program can be delayed.<\/p>\n<p>Then there\u2019s space exploration, which is a whole different ballgame. When I supply o-rings for satellites, I have to comply with NASA\u2019s outgassing standards (ASTM E595), which measure how much volatile organic compounds (VOCs) a material releases in a vacuum. If an o-ring outgasses, those compounds can condense on a satellite\u2019s optical sensors, solar panels, or camera lenses, ruining their performance. Most satellite manufacturers prefer o-rings made from perfluoroelastomers (FFKM), which are the most resistant to outgassing, extreme temperatures, and chemicals. FFKM o-rings can handle temperatures from -50\u00b0C to 320\u00b0C, which makes them perfect for satellites that spend years in orbit, exposed to vacuum and solar radiation. A couple of years ago, I worked with a small satellite startup that was building a CubeSat for Earth observation; they needed o-rings for their propulsion system, which would use small amounts of monopropellant. Monopropellant is highly reactive, so the o-rings had to not only resist the propellant but also meet NASA\u2019s outgassing rules. We supplied custom-sized FFKM o-rings, and they told me later that the seals performed flawlessly during the six-month mission. That\u2019s the kind of work that makes me proud to be an o-ring supplier\u2014we\u2019re contributing to technology that helps monitor climate change, track wildfires, and connect remote parts of the world.<\/p>\n<p>I can\u2019t talk about aerospace o-rings without mentioning the 1986 Space Shuttle Challenger disaster, even though it\u2019s a tragedy that changed everything for the industry. The Challenger\u2019s solid rocket booster o-rings failed because they couldn\u2019t handle the cold temperatures on launch day\u2014below freezing, which made the rubber less flexible. That disaster led to major changes in how aerospace o-rings are tested and specified. Now, every o-ring for a space application has to go through rigorous temperature testing, pressure testing, and thermal cycling to make sure it can handle even the most extreme conditions. For ground test equipment, o-rings have to withstand repeated temperature changes\u2014from room temperature in the lab to -100\u00b0C in a test chamber, then back up again. I supply a lot of o-rings to test facilities, and each one is tested in our warehouse before shipment\u2014we don\u2019t cut corners on quality, because I know that every seal is part of a larger system that can\u2019t afford to fail.<\/p>\n<p>Another often-overlooked aerospace application is in environmental control systems (ECS), which regulate the temperature and air quality inside aircraft cabins. O-rings in ECS components have to seal against conditioned air, which can be at high pressure or very low pressure, and also resist moisture and temperature swings. Here, EPDM o-rings are popular because they\u2019re flexible, resistant to ozone and moisture, and can handle temperatures from -50\u00b0C to 150\u00b0C. I also supply silicone o-rings for cabin air ducts, since they\u2019re odorless and don\u2019t release any harmful chemicals into the air\u2014an important point for passenger comfort, especially on long-haul flights. A few months ago, I got a call from a regional jet maintenance company that was having trouble with leaks in their ECS ducts; the original o-rings had hardened over time, allowing moist air to seep out. We supplied a new batch of EPDM o-rings with a higher durometer (hardness) that was better suited for older duct systems, and the leaks were fixed. That\u2019s another part of the job\u2014working with clients to find the right o-ring when a replacement part isn\u2019t exactly what it needs to be.<\/p>\n<p>Of course, there are challenges specific to being an aerospace o-ring supplier. Aerospace projects often require custom sizes\u2014standard o-rings just don\u2019t work for many applications, because components are unique to each aircraft or satellite. I keep a small inventory of common sizes, but 70% of my aerospace orders are custom-machined. That means working with engineers to get exact dimensions, tolerances, and material specifications, and then testing each custom o-ring to make sure it meets aerospace standards. Lead times are also tight\u2014many aerospace clients need parts in 2-3 weeks, not the standard 4-6 weeks for commercial o-rings. I\u2019ve invested in small, precision machining equipment to handle custom orders quickly, and I\u2019ve built relationships with material suppliers that can deliver aerospace-grade elastomers fast. No one wants to wait for an o-ring when a plane is grounded or a satellite is waiting to launch.<\/p>\n<p>I also have to make sure all my o-rings meet regulatory standards, like those set by the Federal Aviation Administration (FAA) for commercial aircraft and NASA for space systems. Every batch of o-rings I supply comes with a certificate of conformance, proving that it\u2019s been tested and meets the required specifications. For some programs, I even have to provide traceability documents, showing exactly where the elastomer material came from, when it was molded, and who handled it. It\u2019s a lot of paperwork, but it\u2019s necessary\u2014aircraft and satellites can\u2019t use parts that don\u2019t meet strict quality and safety standards.<\/p>\n<p>Over the years, I\u2019ve learned that aerospace o-ring work isn\u2019t just about selling a circular rubber seal. It\u2019s about understanding the application, the conditions the seal will face, and the regulatory requirements that govern it. Whether it\u2019s a commercial jet\u2019s hydraulic system, a satellite\u2019s propulsion system, or a test chamber for a new rocket engine, every o-ring has a job to do, and if it fails, the consequences can be serious. That\u2019s why I don\u2019t just ship o-rings\u2014 I work with my clients to make sure they get the right part, tested and ready to perform when it matters most.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.bsbelts.com\/uploads\/48226\/small\/silicone-gasket-o-rings202607280533051fffb.jpg\"><\/p>\n<p>If you\u2019re an aerospace engineer, maintenance manager, or program coordinator looking for reliable, high-performance o-rings for your next project, I\u2019m here to help. We can discuss your specific application, review material specifications, and provide custom or standard o-rings that meet your needs and regulatory requirements. Don\u2019t take chances with critical seals\u2014let\u2019s connect to find the right solution for your aerospace project.<\/p>\n<p><a href=\"https:\/\/www.bsbelts.com\/cogged-v-belt\/\">Cogged V Belt<\/a> References<br \/>\nNASA. (1995). ASTM E595: Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment.<br \/>\nFederal Aviation Administration. (2020). Aircraft Materials and Processes: Elastomer Seal Requirements for Flight Critical Systems.<br \/>\nNational Aeronautics and Space Administration. (1988). Report on the Space Shuttle Challenger Accident.<br \/>\nSociety of Automotive Engineers. (2018). AS4716: O-Rings, Synthetic Rubber, for Aerospace Applications.<\/p>\n<hr>\n<p><a href=\"https:\/\/www.bsbelts.com\/\">Xingtai Boshuo Auto Technology Co., Ltd.<\/a><br \/>Xingtai Boshuo Auto Technology Co., Ltd. is one of the most professional o-ring manufacturers and suppliers in China, featured by quality products and low price. Please rest assured to wholesale bulk customized o-ring made in China here from our factory. Welcome to contact us for pricelist and free sample.<br \/>Address: No. 58 Quannan East Street, Xiangdu District, Xingtai City, Hebei Province<br \/>E-mail: sherry1@bs-belt.com<br \/>WebSite: <a href=\"https:\/\/www.bsbelts.com\/\">https:\/\/www.bsbelts.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>When I first started out in the o-ring supply business, I had no idea how critical &hellip; <a title=\"What O-Rings are used in aerospace applications?\" class=\"hm-read-more\" href=\"http:\/\/www.artemida-group.com\/blog\/2026\/11\/18\/what-o-rings-are-used-in-aerospace-applications-4307-c96cfd\/\"><span class=\"screen-reader-text\">What O-Rings are used in aerospace applications?<\/span>Read more<\/a><\/p>\n","protected":false},"author":230,"featured_media":3648,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3611],"class_list":["post-3648","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-o-ring-423d-c9a954"],"_links":{"self":[{"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/posts\/3648","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/users\/230"}],"replies":[{"embeddable":true,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/comments?post=3648"}],"version-history":[{"count":0,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/posts\/3648\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/posts\/3648"}],"wp:attachment":[{"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/media?parent=3648"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/categories?post=3648"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.artemida-group.com\/blog\/wp-json\/wp\/v2\/tags?post=3648"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}