If you’ve ever stood in a fabric store staring at a rack of soft, wrinkle-resistant polyester or nylon, or used a plastic water bottle that took years to break down, you’ve held a product made from fiber monomers. These tiny building blocks are the backbone of almost every synthetic fiber and plastic we use daily—up until now, most of them came from fossil fuels like crude oil. As a bio-based fiber monomers supplier, I get asked this question more than any other: Can we actually make these key chemicals out of CO₂ instead of digging up the ground? The short answer is yes, and we’re already doing it for some lines—though it’s still a field that’s evolving fast, with way more potential than we’ve scratched so far. Bio-based Fiber Monomers

Let me break this down without the stuffy jargon that makes people glaze over. First, what are fiber monomers? Think of a monomer as a single Lego brick. You snap 10,000 of the same kind together, and you get a fiber (like polyester or nylon) or a plastic. For polyester, the main monomers are terephthalic acid (PTA) and ethylene glycol (MEG). For nylon, it’s usually adipic acid or caprolactam. For decades, we’ve made all of these from naphtha, a crude oil byproduct. The problem? That’s 9% of global carbon emissions right there, just from making plastics and fibers. Plus, fossil fuels are finite and their prices swing like crazy, which messes up supply chains for businesses like ours.
CO₂-based monomers are different. Instead of pulling a raw material from the ground, we’re capturing CO₂—either directly from industrial exhaust (like from a factory’s smokestack) or even out of the air—and turning it into that same Lego brick we need. The tech isn’t brand new: scientists have been tinkering with it since the 1960s, but it’s only gotten affordable and scalable in the last 10 years, thanks to better carbon capture tech and cheaper renewable energy to power the chemical reactions.
Right now, we’re working with a CO₂-based MEG for polyester fiber that’s already 30% lower carbon than the fossil version. Wait, 30%—that’s not zero, but it’s a start. The way it works is pretty neat: we take captured CO₂, mix it with hydrogen from renewable electrolysis (think solar or wind power splitting water into H₂), and run it through a catalyst (a fancy material that speeds up chemical reactions without getting used up). That mix turns into MEG, which we then use to make polyester fiber. Our customers have tested it for activewear, bed sheets, and even upholstery—they say it feels the same, wears the same, and washes the same as regular polyester, just with a way smaller carbon footprint.
But it’s not all smooth sailing. Let’s talk about the big hurdles, because that’s what makes this conversation real, not just hype. First, carbon capture itself. Most CO₂ capture right now is expensive—like, you’re paying $50 to $100 per ton of CO₂ captured, whereas we used to just release it for free. But prices are dropping fast: the US Inflation Tax Credits bring it down to $30-$50 a ton for new projects, and some new capture tech (like direct air capture) is even getting cheaper. Another hurdle is reaction efficiency. Right now, turning CO₂ into monomer isn’t 100% efficient—we lose a chunk of the CO₂ and energy in the process. We’re getting better, though: a lot of university labs (like MIT and Stanford) have new catalysts that turn 60% more CO₂ into the monomer we need, which cuts waste and cost.
Then there’s supply chain. Even if we can make the monomers, we need to transport them to fiber makers, who often have contracts with big chemical plants. As a supplier, I’ve had to work with our customers to prove that CO₂-based monomers work for their products, and that we can deliver consistent volumes. A few years ago, a clothing brand told me they tried a CO₂-based fiber and it pilled after a month of wear—turns out, the monomer purity was off. We fixed that by tweaking our reaction process, and now that same brand uses our CO₂-based monomers for their entire line of work out. That kind of trial-and-error is par for the course, but it’s worth it when we can cut emissions for a product that’s made to last.
Wait, let’s clear up a common myth: people think CO₂-based monomers are just “greenwashing” tricks. But no—when we make a monomer from CO₂, we’re not adding new carbon to the atmosphere. The CO₂ we capture would’ve been released anyway (if it’s from a factory exhaust), or it’s pulled from the air, so when the fiber eventually gets recycled or breaks down, it releases that same CO₂ back, instead of locking up fossil carbon that’s been underground for millions of years. It’s a closed loop, basically. We don’t have to wait for some far-off “net zero” utopia—we can swap out existing fossil monomers for CO₂-based ones right now, no redesigns needed for most fiber production lines.
Another big win: circularity. Our CO₂-based monomers can be recycled just like regular fossil ones, so a polyester shirt made from our monomer can be turned back into a new shirt, over and over. Some people ask, “Why not just use recycled plastic instead of CO₂?” Recycled plastic is great, but demand is way higher than supply right now. Plus, recycled plastic often has contaminants that make it harder to use for high-quality fibers—like the kind used in activewear that needs to stretch and hold color. CO₂-based monomers can be made to have the same purity as virgin fossil ones, so they fill that gap when recycled supplies are tight.
I get it, if you’re a product manager or a supply chain lead, you care about two things: cost and consistency. For years, CO₂-based monomers were 20-30% more expensive than fossil ones. But in the last two years, we’ve brought that gap down to less than 5% for our MEG, and we’re on track to match fossil prices by 2027. That’s not just guesswork—we’ve invested in a new production line that’s 10x bigger than our old one, and economies of scale will bring costs down even more. Our customers don’t have to pay a premium to use a better product now, which is why we’re seeing so more demand from brands that want to hit their carbon goals without breaking the bank.
But let’s not act like fossil monomers are going away tomorrow. There’s still a lot of fiber made from other monomers that we can’t yet make from CO₂ at scale. Nylon, for example, is made from adipic acid, which is super cheap to make from fossil fuels. Some companies are working on CO₂-based adipic acid, but it’s only been tested in lab settings so far. Same with acrylic fiber, used in sweaters and carpets—its monomer is usually acrylonitrile, which we’re still figuring out how to make from CO₂ without losing too much quality.
As a bio-based fiber monomers supplier, my job isn’t to say fossil fuels are bad (though let’s be real, they’re part of the problem)—it’s to show that there’s a real alternative, right here, right now. Last year, we supplied 2,000 tons of CO₂-based monomer to a outdoor gear company, and they reported a 25% drop in their product’s carbon footprint, all without changing their manufacturing process. That’s the kind of win that matters. We’re also partnering with a local carbon capture company to source 100% of our CO₂ from industrial exhaust, so our monomers have a carbon footprint that’s negative—meaning we’re removing more CO₂ from the air than we emit in production. It’s not perfect, but it’s way better than the alternative.
If you’re reading this and you’re involved in making fibers, packaging, or any product that uses synthetic monomers, you’re probably wondering how to make the switch. We don’t have to redo every part of your supply chain—we can work with your existing monomer storage and processing lines. A lot of our clients start small, using 10% CO₂-based monomer in their blends, then ramp up as supply gets more consistent. It’s low risk, high reward, and it’s something you can roll out in 6-12 months, not 10 years.

Look, the world’s not going to stop using synthetic fibers anytime soon. They’re strong, cheap, and versatile. But we can make them without digging up the ground and releasing billions of tons of CO₂ each year. The key is investing in tech, scaling production, and working with suppliers like us to make the switch gradual, not a complete overhaul.
Triallyl Isocyanurate I’ve been in this industry for 12 years, and I’ve seen a lot of “next big things” that never pan out. But CO₂-based monomers are different—they’re not a gimmick. They’re already in use, they’re getting cheaper, and they’re backed by governments and big brands that are serious about cutting emissions. If you’re ready to test them out, or just want to ask more about how they work for your products, reach out to our team. We’d love to walk you through our production process, share case studies from other brands, and figure out the best way to integrate CO₂-based monomers into your supply chain.
References
- Aresta, M. (2010). Carbon Dioxide as a Chemical Feedstock. Wiley.
- Center for Climate and Energy Solutions. (2023). Carbon Capture, Utilization, and Storage: Key Trends and Policy Updates.
- European Commission. (2022). Bio-based Industries Joint Undertaking: Annual Report.
- International Energy Agency. (2021). The Future of Petrochemicals: Towards More Sustainable Plastics and Fertilizers.
- National Renewable Energy Laboratory. (2023). Renewable Hydrogen Cost Reduction: Scaling Up Electrolyzers for a Low-Carbon Economy.
Hunan Hansheen Chemical Co., Ltd.
We are one of the most reliable bio-based fiber monomers manufacturers and suppliers in China, also support customized service. Please feel free to wholesale bulk high quality bio-based fiber monomers made in China here from our factory. Welcome to contact us for price list.
Address: Building A3, Zhonglian Avenue New City Commercial Plaza, Jinshi High tech Industrial Development Zone, Changde City, Hunan Province
E-mail: hanxin.liuchangxin@gmail.com
WebSite: https://www.hansheenchem.com/