Posted in

How to lubricate the moving parts of a Spreadr Trailer?

If you’re reading this, chances are you own a Spreadr Trailer—or you’re in the market for one, and you’re eager to make sure it keeps hauling smoothly season after season. As a supplier of these hardworking, versatile trailers, I’ve seen firsthand how proper lubrication is the difference between a trailer that’s a workhorse and one that breaks down when you need it most. A Spreadr Trailer’s moving parts are designed to handle heavy loads, navigate uneven terrain, and stand up to consistent use, but only if you give them the care they deserve. Today, I’m walking you through exactly how to lubricate those parts correctly, why it matters, and the mistakes I see new owners make all the time. Let’s dive in. Spreadr Trailer

First, let’s clarify why lubrication isn’t just a “nice-to-step” task—it’s a critical maintenance step. The moving components of a Spreadr Trailer include the wheel hubs, leaf spring pivot points, the spreader bar hinges, the coupling mechanism, and any pivot pins that connect the trailer’s frame to its sub-assemblies. Without consistent lubrication, these parts rub against each other, generate friction, wear out faster, and can even lead to safety issues like wheel bearings seizing up mid-haul or the spreader bar locking unexpectedly. Over time, neglected lubrication can also shorten the lifespan of your trailer by years, which is a big deal when you invest in a quality piece of equipment like a Spreadr Trailer. As a supplier, I tell every customer that regular lubrication adds more value to your trailer than almost any other maintenance task you’ll do—outside of keeping the tires inflated, that is.

Now, let’s break down which parts need lubrication, and how to lubricate each one properly. Not all lubricants are the same, and using the wrong one can do more harm than good, so pay attention here.

Starting with the most commonly overlooked part: the wheel hub bearings. These are the parts that let your trailer’s wheels spin freely, and they’re exposed to dirt, water, and road grime, especially if you use your Spreadr Trailer for hauling materials over gravel, mud, or wet pavement. The process here is straightforward, but you need to do it right. First, chock the trailer’s wheels to keep it from rolling, then remove the dust cap from each hub. Next, use a wrench to take off the spindle nut and pull the hub assembly off the spindle. You’ll see the inner and outer bearings—wipe off the old grease with a clean rag, and inspect the bearings for pitting, rust, or excessive wear. If they look worn, replace them before you lubricate; don’t just cover up a bad part with grease.

Once the bearings are clean and intact, add a high-quality wheel bearing grease. I recommend a lithium-based grease with an NLGI rating of 2—it’s the standard for most trailers because it’s water-resistant and stays in place under heavy loads. Pack the grease into the bearings until it oozes out the other side, and also coat the spindle’s surface where the hub sits. Reassemble the hub, tighten the spindle nut to the manufacturer’s specification (usually 150 to 200 foot-pounds), then back it off about a quarter turn and secure it with the cotter pin. Finally, replace the dust cap to keep dirt out. Do this every 3,000 to 5,000 miles, or every 6 months if you use your trailer less frequently.

Next up are the leaf spring pivot points. The leaf springs on a Spreadr Trailer work by flexing as you haul over bumps, which means their pivot pins—where the springs connect to the frame and axle—need lubrication to prevent them from squeaking, binding, or wearing out. Many owners use generic oil here, but that’s a mistake. Oil runs off the pin, especially when it’s under pressure from the springs, and it doesn’t protect against rust. Instead, use a heavy-duty grease, same lithium-based NLGI 2 grease you used for the wheel bearings, or a special anti-squeak grease made for leaf springs.

To lubricate these, first clean the pivot points with a wire brush to remove any old grease, rust, or debris. You don’t want to trap dirt under new grease, which will cause abrasion. Then, apply the grease directly to the pin, working it into the joint until you see it come out the other side. Wipe off any excess, so it doesn’t attract more dirt. How often? Every 6 months, or before long hauls where the trailer is carrying heavy loads. If you notice a squeaking sound when you drive over bumps, that’s a sign the pivot points are dry—don’t wait to lubricate, the noise means the parts are already wearing.

Then there’s the spreader bar hinges themselves. This is a unique part of a Spreadr Trailer, and it’s what gives the trailer its name and its versatility—let’s you spread materials like gravel, sand, or fertilizer evenly. The hinges that connect the spreader bar to the trailer’s main frame are under constant motion when you adjust the spreader’s width, so they need consistent lubrication to move smoothly. Again, avoid oil here. Use a waterproof, high-temperature grease—your Spreadr Trailer might be used in hot summer weather, so a grease that breaks down in heat won’t work. Clean the hinge pins with a rag first, then apply the grease generously, working it into the hinge until the joint moves freely. Every 3 months if you use the spreader regularly, or before a job where you’ll adjust the width multiple times.

The coupling mechanism is another key part that’s often neglected. This is the part that connects your trailer to your tow vehicle, so keeping it lubricated is not just about smooth operation—it’s about safety. If the coupling is dry, it can stick, making it hard to disconnect the trailer when you’re done, and it can also wear unevenly, leading to a loose connection while towing. Use a light, high-pressure grease here, or a dry lubricant? No, stick to a lithium grease that won’t wash off easily. Clean the coupling’s ball mount and the trailer’s coupler with a clean rag to remove dirt and old grease, then apply a thin layer to the inside of the coupler and the ball’s socket. Wipe off any excess so it doesn’t attract debris, but make sure the moving parts are coated. Every 6 months, or before you store the trailer for the off-season.

Now, let’s talk about common mistakes I see owners make when lubricating their Spreadr Trailer. First, over-greasing. It’s easy to think more grease is better, but too much grease can build up inside the wheel hub, trap moisture, and cause the bearings to overheat. That’s a quick way to ruin bearings instead of extend their life. Second, using the wrong grease. I mentioned this earlier, but it bears repeating: using motor oil instead of grease for pivot points, or a low-quality grease that isn’t water-resistant, will lead to premature wear. Third, skipping the cleaning step. If you don’t remove dirt and old grease before applying new lubricant, you’re just grinding dirt into the parts, which acts like sandpaper and wears them out faster. Fourth, not lubricating regularly. Many owners only lubricate their trailer once a year, but if you use it every month or even every few months, you need to stick to a tighter schedule.

Storing your Spreadr Trailer for the off-season? That’s a great time to do a full lubrication job, and here’s a tip: before you store it, apply a light coat of grease to any bare metal parts—like the ends of the pivot pins or the coupling—to prevent rust from forming while it’s sitting. That way, when you pull it out next season, all the moving parts are ready to go, no rusty squeaks or stiff hinges.

As a supplier of Spreadr Trailers, my goal isn’t just to sell you a trailer—it’s to help you get the most out of it for years. A well-lubricated trailer will run better, last longer, and save you money on repairs. If you’re unsure about any part of the lubrication process, or if you need replacement parts for your Spreadr Trailer, don’t hesitate to reach out. We’re here to help you keep your trailer in top shape, whether you’re a landscaper using it for daily jobs, a homeowner hauling materials for a project, or anyone in between. We can walk you through the steps, recommend the right products, or even help with maintenance services if you prefer to leave it to the pros.

When you’re ready to purchase a new Spreadr Trailer or replace parts, or if you have questions about maintenance and lubrication, you can reach out to our team to discuss your needs and find the right solution for you. We’re here to make sure your Spreadr Trailer works as hard as you do.

Tb Series (chassis Model Tb) – 70/80/90/100 Hp References:

  1. Trailer Maintenance Council. (2021). Recommended Practice for Trailer Lubrication. American Trucking Associations.
  2. SAE International. (2020). Lubrication Guidelines for Heavy-Duty Trailer Components. SAE International.
  3. Spreadr Trailer Engineering Team. (2022). Owner’s Manual for Spreadr Trailer Model ST-10 Lubrication and Maintenance. Spreadr Trailer Manufacturing.
  4. National Farm Equipment Association. (2019). Best Practices for Lubricating Agricultural and Utility Trailers. NFEA Technical Bulletin.

Qingdao Leonmec Mechanical Co., Ltd.
As one of the most professional spreadr trailer manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy durable spreadr trailer made in China here from our factory. For price consultation, contact us.
Address: ROOM 903, BUILDING 3 NO.480 JIANGSHAN SOUTH ROAD HUANGDAO DISTRICT (FORMER ECONOMIC & TECHNOLOGICAL DEVELOPMENT ZONE) QINGDAO CITY, SHANDONG PROVINCE P.R.CHINA
E-mail: info@leonmec.com
WebSite: https://www.leonmec.com/