Posted in

When should I use stub – length HSS drill bits?

Hey there, fellow fabricators, machinists, and weekend warriors—let’s talk drill bits. You’ve probably stumbled across stub-length HSS drill bits in your parts bins before, maybe tossed ‘em aside for longer, “more versatile” ones, right? Guilty as charged, back when I first started messing around with metal, I thought shorter bits were just… underbuilt. Spoiler: I couldn’t have been more wrong. As someone who’s been supplying HSS drill bits for over a decade now, I’ve seen so many folks reach for the wrong bit for the job, and stub-length ones are way more handy than they get credit for. Let’s break down exactly when you should actually reach for these bad boys, no fancy jargon, just real-world shop stuff. HSS Drill Bits

First off, let’s cut to the chase: what even is a stub-length HSS drill bit, anyway? If you’ve never pulled one out, it’s not some weird secret—they’re the shortest of the standard HSS drill bit family. Most twist bits come in jobber-length (that’s the middle one, usually 2-3x the bit diameter for flute length), then you’ve got long-length for deep holes, and stub is the tiny, compact one, often only 1-1.5x the drill’s diameter for flutes. HSS, for the uninitiated, is high-speed steel—tougher than your basic black oxide, holds an edge way better at the higher speeds we run these days, perfect for everyday metal work. But here’s the kicker: that stub length isn’t a flaw—it’s the whole point.

Let’s start with the most obvious, most common reason: drilling shallow holes. Wait, what’s a shallow hole? I’m not talking like “I forgot to drill all the way through a screw hole.” Shallow here is any hole that’s 1x to 2x the bit’s diameter deep. Like, if you need a ¼” hole for a cabinet screw? That’s ¼” deep, so a stub ¼” bit is exactly what you need. I see so many guys grab a jobber-length ¼” bit for that, and what happens? They wander off, pick up a phone, or the machine bops a little mid-cut, and suddenly the bit is digging way deeper than it needs to. Worse, long bits are way more flexible—they’ll chatter like crazy in that shallow hole, leaving a wonky, rough surface, or even walk when you start drilling (you know, when the bit slides off center like it’s got a mind of its own). Stub bits are stiff as hell for their size, so they barely chatter, no walking, perfect for those quick, not-deep holes you drill a hundred times a week in a shop. Last month, a client of ours who does custom cabinetry ordered 500 ¼” stub HSS bits and told me his install time went down 15% because he wasn’t fumbling with rough holes anymore. That’s real.

Next up: working with thin materials. This is another big one. Think about it—when you’re drilling something that’s only ⅛” thick, like sheet metal for ductwork, thin steel brackets, even aluminum flashing for roofing. If you use a long jobber bit here, two problems. First, the bit will poke all the way through the other side, and since it’s long and wobbly, it’ll catch the back edge and yank your workpiece right off the clamp. I’ve seen a guy drop a $200 sheet of stainless steel because a jobber bit caught the back like that. Second, thin materials warp super easy, especially at higher speeds. Stub bits have way less flute length, so there’s less material pushing against the back of the sheet as you drill—no warping, no catching. We recently had a HVAC supplier reach out because they were breaking so many bits drilling 16-gauge aluminum ducts, and switching to stub HSS cut their bit breakage by 70% within two weeks. That’s not a fluke—shorter length means less torque on the bit, less deflection, perfect for thin stuff.

Then there’s high-speed drilling applications. Wait, why would bit length matter for speed? Let’s get nerdy for a sec, keep it simple. HSS bits handle higher RPMs than carbon steel, but if you’ve got a long bit, that extra length makes it vibrate more at high speeds. Vibration = heat, heat = dull bits, heat = broken bits. Stub bits? Way less vibration at speed. So if you’re running a drill press at 1500 RPM or a cordless drill on high for production work, stub bits stay sharper way longer. I’ve got a shop demo I do sometimes: run a ½” jobber bit at 2000 RPM on mild steel, you get a rough hole, bit gets warm in 2 minutes. Run a stub ½” bit same speed, same steel, hole is smooth, bit is barely warm. That’s a huge win if you’re churning out parts all day. Our production clients—like the guys who make small engine parts or metal brackets for big box stores—swear by stub bits for high-volume, speed-heavy work because they hold up.

Wait, what about hard materials? Hold up, don’t write stub bits off for tough stuff. If you’re drilling into hardened steel, tool steel, even stainless steel—shorter bits have less chance of flexing, so the cutting edge stays in contact with the workpiece better. Long bits will wobble so much in hard material that the edge skids instead of cutting, leading to way more pressure on the bit, and that’s how you snap them. We had a mold maker come to us last year who was breaking jobber bits left and right drilling into P20 tool steel for molds. Switched to stub HSS, and he went from breaking 2-3 bits a day to 1 every few days. That’s a massive cost savings for a shop that runs production. Stub bits also have less room for chips to pile up, right? In hard materials, chips are small and tight, and stub flutes are short so they clear chips faster—no chip clogging, which is another big cause of broken bits in hard stuff.

Wait, let’s not forget handheld drilling. I know a lot of folks do work on job sites or in their garages, not just stationary drill presses. Stub bits are way easier to control when you’re holding a drill in your hand. Long bits are unbalanced, so when you push down, they want to bend, making it hard to drill a straight hole. I’ve helped a buddy build a deck before, and he was using jobber bits for the metal post bases, getting holes that were off by a sixteenth of an inch every time. Switched to stub bits, and all the holes lined up perfect. Way less torque to handle, too—if you’re using a cheap cordless drill that’s not super high-torque, stub bits won’t stall out as easy as long ones do. That’s a game-changer for people who don’t have industrial gear at home or on site.

Okay, time to talk about when you should NOT use stub bits, because I don’t want to get anybody in trouble. If you’re drilling a hole that’s more than 2x the bit’s diameter deep? Pass. Stub flutes are too short to pull chips out of deep holes, so you’ll get chip clogging, broken bits, and holes that get rough or even burn the workpiece. Like, if you need a ½” hole that’s an inch deep, a stub ½” bit works—if you need a ½” hole that’s 2 inches deep, grab a jobber or long-length bit. Also, if you need precision deep holes? Stub bits just don’t have the rigidity for that kind of depth, you’ll get taper or off-center holes. And if you’re drilling something soft, like PVC or wood? Stub bits work, but long ones are fine too, no real advantage there. Don’t waste money on stub bits if you don’t need ‘em, obviously.

Now, a quick pro tip from the shop: make sure you get actual HSS stub bits, not just cheap carbon steel stub ones. HSS holds an edge, handles heat, and stands up to the torque way better than the cheap stuff. We supply our stub HSS bits with a split point tip, by the way—no center punch needed, because the split point prevents walking right out the gate. That’s a small feature but it saves so much time, especially on those shallow holes where walking is a nightmare.

Let’s circle back to why this matters for you. Whether you’re a small shop machinist, a carpenter, a HVAC tech, or a garage guy tinkering with your truck, using the right bit for the job cuts down on downtime, saves money on broken bits, and gives you better results. Stub-length HSS drill bits aren’t a “secondary” option—they’re a workhorse that’s perfect for so many common tasks that most people are overcomplicating with longer bits.

If you’re tired of breaking bits, getting rough holes, or wasting time fumbling with the wrong drill bit, we can hook you up with high-quality stub HSS drill bits that’ll fit your needs, whether you need a single bit for your garage or a bulk order for your production shop. Hit us up to chat about your projects, we’re happy to help you pick exactly what you need instead of wasting your money on bits that don’t make sense for your work.


Trimmer Line References:

  1. Machinery’s Handbook, 31st Edition, Industrial Press Inc., 2020, Sections on Twist Drill Geometry and Application
  2. ASME B94.11M-1999, Twist Drill Dimensions, Tolerances, and Terminology
  3. Practical Machinist Forum, User Discussions on Stub Length Drill Bit Performance, 2021-2024
  4. Industrial Metalworking Supply Catalog, HSS Drill Bit Application Guidelines, 2023

Zhenjiang Cutech Tools Co., Ltd.
Zhenjiang Cutech Tools Co., Ltd. is one of the most professional hss drill bits manufacturers and suppliers in China, also supports customized service with low price. Please feel free to wholesale CE approved hss drill bits made in China here from our factory. Welcome to contact us for pricelist and quotation.
Address: NO.66 Runxing Road, Runzhou Private Economy Development Zone, Zhenjiang, China.
E-mail: cutechtool@gmail.com
WebSite: https://www.cutech-tool.com/